What MOQ Should You Expect From an Appliance OEM in India?
It depends on how much new tooling your product needs. At Topsail the minimums are:
- About 5,000 pieces a month for a fully custom product with new moulds.
- About 2,000 pieces per order for a product built on moulds Topsail already has.
- About 1,000 pieces for assembly only, where your parts or SKD kits come in from China and we assemble them in India.
Other Indian OEMs quote different numbers, but the logic is the same everywhere. The more new steel a factory has to cut for you, the more volume it needs to make the project pay back.
Why Do Custom Moulds Need a Higher MOQ?
A new appliance can need several injection moulds, one for each plastic part: the body, the jar, the lid, the buttons. Each mould is a large, one-time cost. That cost only makes sense when it is spread over enough pieces, month after month.
For full Indianisation we recommend at least 5,000 pieces a month. Below that, the mould investment rarely pays back, for the brand or for us.
That is why the 5,000 figure is a monthly volume, not a single trial order. A brand that sells 500 pieces a month is better served by an existing platform or by assembly only, at least until volumes grow.
Existing Moulds, Custom Tooling or Assembly Only: How Do They Compare?
| Route | Topsail MOQ | Who pays for moulds | Best for |
|---|---|---|---|
| Custom moulds (full OEM) | About 5,000 pcs a month | The brand, and the brand owns them | Proven products with steady volume and your own design |
| Existing Topsail moulds | About 2,000 pcs per order | No new mould cost | Brands that want to launch fast under their own name |
| Assembly only (SKD) | About 1,000 pcs | Stays with your China factory | Importers who need to localise fast under BIS rules |
In every route, BIS certification charges, import costs and duties are on the brand's account. If you are not sure which route fits, our guide to OEM, private label and ODM explains the differences.
What Does the Custom Mould Route Involve?
This is the route for a brand that wants its own product, not a catalogue model. You send samples, and Topsail costs the product, the moulds and any imported components, and gives you a rough estimate. Once the numbers work, Topsail takes care of tooling, component sourcing and prototyping, all the way to finished product delivered in India.
Pieces a month, custom moulds
Project start to product in India
Owns the moulds and design
In OEM, the brand pays for the tooling and owns the moulds and the design. Read who owns the mould before you sign anything with any factory.
The products that suit this route best are plastic-heavy, simple to assemble, not too large, sold in big volumes in a proven market, and able to carry at least 60% value addition in India.
When Do Existing Moulds Make More Sense?
When speed and capital matter more than a unique design. Topsail has more than 200 proprietary moulds, so many mixer grinders, choppers, fans and similar products can be built on a platform that already exists.
You skip the mould cost and most of the tooling time. You still sell under your own brand, with your own packaging. The trade-off is that the product's shape is shared with the platform, so it is less distinctive than a fully custom design.
What About Assembly Only?
Assembly is the lowest entry point, at about 1,000 pieces. Your existing China factory ships parts or SKD kits, and Topsail assembles, tests and dispatches in India. Topsail already does this for products such as trimmers, air purifiers and baby care products.
Many brands use assembly as a first step and then localise parts over time, moving towards the custom route as volumes grow. Run both supply lines side by side until the Indian product has proved itself.
What Else Comes With the MOQ?
The MOQ is only one part of the commercial terms. At Topsail the rest are:
- Payment: 30% deposit with the order, balance before dispatch.
- Mould payments: 50% upfront, balance on completion of the moulds.
- Costing: an open bill of materials, with every cost and the profit margin shown.
- BIS: about Rs 1 lakh per product and about 90 days from samples to licence, with the licence in Topsail's name as the manufacturer.
- Samples: existing products at retail price. Custom prototypes are charged separately, and Topsail signs an NDA on request.
- Warranty: 12 months against manufacturing defects.
- Capacity: about 5,000 units a day.
What This Means for Your Brand
Start with your monthly sales, not with the factory's number. If you sell 5,000 or more pieces a month of a proven product, a custom mould pays back and gives you a product nobody else has. If you sell less, launch on existing moulds or assemble your current product in India, then move to your own tooling once the volume is there.
Topsail runs moulding, motors, assembly and testing under one roof in Silvassa, near Nhava Sheva and Hazira ports, with 12 injection moulding machines, 200+ moulds, an automatic AC motor line and an in-house tool room. Send us a sample and your monthly volume through our contact page, and we will tell you which route fits.





